The Atex beacon is designed to completely replace existing Atex signal towers and other opticical Atex signaling solutions. the device is fitted with 78 Ultra Bright RGB LEDs. These LEDs make sure the device is low on energy consumption. There are several standard patterns possible like a fancy loop, continuous lighting, looping or flashing. Standard the device is set to emit Red, Green, Blue and Yellow light. It is possible to make all colors and patterns if you connect a Modbus driver. Standard the device can be controlled by powering the inputs. Furthermore a Modbus controlled relay is included into this device, this makes it possible to connect a sounder or any other device to the beacon. In order to do so the Atex enclosure is equipped with two cable entries. The beacon is Atex certified, zone 1, 2, 21 and 22, is highly resistant to dust and moist, IP65 and is easy to install.
In order to provide you with a broad range of applications the power supply is 9-30Vdc. This makes the device applicable for lots of applications.
The beacon sounder is equipped with ultra-bright LED lighting, even clearly visible during daytime. The sound is optimally amplified and distributed through the specially designed sound cone. The compact design of the beacon sounder is well applicable to our AirWatch.
The housing is made of Aluminium LM06 and is epoxy coated to protect it from corrosion. The Bulb is made of hardened glass. Included in the package is also a Atex certified Cable gland.
|Size||20,5 x 13,6 cm (7.87 x 5.11 in.)|
|Operating Temperature||-20 to +40°C (-4 to 104°F)|
|IP Rating||IP 65|
|Cabel Entry||2 x ¾”NPT|
|Material||Copper free aluminium LM6 (copper<0.05%) With epoxy coating|
|Operating||Voltage 9 – 30V DC|
|Energy consumption||9W Max (Stand-by <0.1W)|
|Potential free relay contact||24V DC 2A|
|Max User Options||Light effect, Colour selection|
|EX mark II||2 GD Ex d IIC T6 (INERIS 01ATEX0072x)|
|Can be used in zone||1, 2, 21 and 22 Meets the standard IEC60079 and EN60079|