POLI - MULTI GAS DETECTOR
Available in diffusion or pump version

Carousel is loading...
Sensor Options

SensorRangeResolutions
PID0-1000ppm0.1ppm
Oxygen (O2)0-30%Vol0.1%Vol
Combustible (LEL)0-100%LEL1%LEL
Carbon Monoxide (CO0-1000ppm1ppm
Hydrogen Sulfide (H2S)0-100ppm0.1ppm
Ethylene Oxide (ETO)0-100ppm0.1ppm
Hydrogen Fluoride (HF)0-10ppm0.1ppm
Nitric Oxide (NO)0-250ppm1ppm
Methanethiol (CH3SH)0-10ppm0.1ppm
Sulfur Dioxide (SO2)0-20ppm0.1ppm
Hydrogen Cyanide (HCN)0-100ppm1ppm
Ammonia (NH3)0-50ppm1ppm
Phosphine (PH3)0-5ppm0.01ppm
Chlorine (Cl2)0-10ppm0.1ppm
Nitrogen Dioxide (NO2)0-20ppm0.1ppm
Hydrogen Chloride (HCl)0-15ppm0.1ppm
Chlorine Dioxide (ClO2)0-1ppm0.01ppm
Acetaldehyde (C2H4O)0-20ppm0.1ppm
Combustible (Vol%)0-100%Vol0.1%Vol
Carbon Dioxide (CO2)0-50000ppm100ppm
CO+H2SCO: 0-500ppm
H2S: 0-200ppm
CO: 1ppm
H2S: 0.1ppm

Application Support

Product Detail
Specifications
Downloads

The POLI multi-gas detectors (MP400/MP400P/ MP400S) offer 4 or 5-gas monitoring of oxgen (O2), combustible (LEL), toxic, carbon dioxide (C02) gases and volatie organic vapors (VOCs). The MP400 and MP 400P are basic models of O2, LEL , carbon monoxide (CO) and hydrogen sulfide (H2S) configuration in diffuson and pump for compliance application. The MP400S adopts a full range of sensor selection, e.g. electrochemical (EC), pellistor, non-dispersive infrared (NDIR) and photo-ionization detector (PID) in pump. An option of wireless communication enable real-time monitoring of gas readings and alarm status including Man Down Alarm from remote locations for better visibility and faster response.

  • Available in diffusion or pump version
  • Man Down Alarm with real-time remote wireless notification
  • IP-65/67 water and dust resistant case
  • Real-time gas concentration readings and alarm status enabled by state-of-the-art wireless technology
  • Large graphical display icon-driven user interface through intuitive, simple-to-operate two-button user interface
  • Easy access to pump, sensor, filter and battery
  • Over 30 interchangeable sensor options, including PID for VOC, NDIR and catalytic for combustibles, and NDIR for CO2
  • Intelligent sensors store calibration data, so they can be swapped in the field
Size5.74 x 3.31 x 1.65 in (140 x 84 x 42 mm)
Weight14 oz (400 g)
SensorOver 30 interchangeable and field-replaceable sensors including PID for VOCs, EC for Toxic and O2, Pellistor for LEL, and NDIR for LEL and CO2
BatteryRechargeable Li-ion pack:18 hours in diffusion with no wireless, 16 hours in diffusion with wireless, 12 hours in pump with no wireless, and 10 hours in pump with wireless
Direct ReadoutReal-time reading of gas concentration, PID measurement gas and correction factor, Man Down Alarm on/ off, individual compliance indicator, battery status, datalogging on/off, wireless on/off and reception quality STEL, TWA, peak and minimum values
Display128 x 128 graphical LCD, 1.77 x 1.73 in (45 x 44 mm), with LED backlight for enhanced display readability. Automatic screen “flip” feature.
Keypad2 operation keys
SamplingBulit-in pump or diffusion
CalibrationManual or automatic bump test and calibration with CaliCase (separate orders)
AlarmWireless remote alarm notification, audible (90dB@750px), vibration, visual (flashing bright red LEDs), and on-screen indication of alarm conditions Man Down Alarm with pre-alarm and real-time remote wireless notification
DataloggingContinuous datalogging (6 months for 4 sensors at 1 minute intervals, 24 hours a day and 7 days a week)
Charging and CommunicationCharging, data download, instrument setup and firmware upgrades on PC or laptop via PC comm, cradle, travel charger, or CaliCase Wireless data and alarm status transmission via built-in RF modem (optional)
Temperature-4° to 122°F (-20°C to 50°C)
Humidity0% to 95% relative humidity (non-condensing)
IP RatingIP-65 (pump); IP-67 (diffusion)
Safety CertificationsUL/cUL: Class I, Div 1, Group A, B, C, D
T4, -20°C ≤ Tamb ≤ +50°C (pending)
EMC/RFI
EMC directive: 2004/108/EC
Warranty2-year including most sensors